### Submodel

Submodel conditions can be defined between a *STEP card and an *END STEP card only.

First line:

• *BOUNDARY,SUBMODEL
• use the STEP or DATA SET parameter to specify the step or mode in the global model

Following line:

• Node number or node set label
• First degree of freedom to be interpolated from the global model
• Last degree of freedom to be interpolated from the global model
Repeat this line if needed.

Example:

*BOUNDARY,SUBMODEL
73,1,3


specifies that all displacements in node 73 should be obtained by interpolation from the global model.

Example files: .